Help removing stain

macdonkk

New member
May 20, 2020
3
Boston, MA
Hi everyone, just opened my pool a few days ago, and I noticed a lot of staining on the floor, sides, and steps of the pool. It was resurfaced with diamond brite last July, and was fine at closing. I scrubbed with a brush, vacuumed, etc and nothing could get the stain out. Just tested the water and

hardness - 500
Total chlorine - 3
Free chlorine- 1
PH- 7.2
Alkalinity - 120

I’ll add a few pictures to see what you guys think it is. Iron or copper was my best guess. Any advice on it and how to get rid of it are appreciated. Thanks for your help! - Keith
 

Attachments

  • ECA2B771-CCE8-4FFF-822F-E683B293E38F.jpeg
    ECA2B771-CCE8-4FFF-822F-E683B293E38F.jpeg
    675.1 KB · Views: 14
  • E5E2D8C3-A786-4A61-AE2D-EE1545EEE137.jpeg
    E5E2D8C3-A786-4A61-AE2D-EE1545EEE137.jpeg
    871.4 KB · Views: 13

macdonkk

New member
May 20, 2020
3
Boston, MA
17k gal, gunite (Diamond Brite), Hayward 1.85 THP VS pump, Hayward Goldline SWG, STA-RITE system 3 modular media filter, Taylor testing kit
 
Thread Status
Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.