hayward parts broken

deejjoy

Member
Jan 22, 2010
9
Murrieta, CA
hello tfp

i have a hayward de4800 which i plan on cleaning this week. so upon further inspection i realized the filter head missing a Pressure Gauge, Relief Valve/ Gauge Adapter Assembly and o-ring, these parts are required i'm i certain right to relieve pressure or is there any work arounds without the parts. And yes i did buy some replacement parts. oh and how do i work a Slide Valve Assembly to rinse and backwash. and for the record, none of this was our fault but a foreclosure house.
 

Attachments

acamato

LifeTime Supporter
May 12, 2008
151
Long Island, NY
I broke mine this year. It is a standard replacement part. Cost about $20. Part number DEX2400S. It is not a pressure relief valve. You use it air vent air from the filter.

Try unscrewing the black part that is on the filter. The part should screw directly into the filter housing.
 

waste

TFP Expert
LifeTime Supporter
Mar 29, 2007
4,160
Coastalish 'down easter'
Welcome to TFP!!

Sorry to have ignored your issue :oops:

The part you're looking for is a DE 2400 ? (my parts manual says DEX360AR), but I know there is another part # for it.
 

deejjoy

Member
Jan 22, 2010
9
Murrieta, CA
just received my spare part and started bleeding the air. what i learned from the previous owner as to what the misc was broken is cause he screwed in the part to were it broke like just now :(
 

Other Threads of Interest