Hayward Omnilogic freeze protection

fagin007

Member
Aug 2, 2020
5
Dallas, Texas
New pool owner as of July and here in North Texas its getting cold and all of my neighbors are talking about their pumps coming on at night when the temp drops below around 33 degrees well mine does not. I checked the configuration and I dont see freeze protect anywhere in the settings under water features or in the sensors for backyard or for pool or for spa. I show the air sensor and it currently shows 33 degrees but have no way of knowing if freeze protection is enabled or not and the manual online gives me nothing to help me so I need help from some veterans.
 

ajw22

Gold Supporter
TFP Guide
Jul 21, 2013
21,205
Northern NJ
Pool Size
35000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Pentair Intellichlor IC-60

fagin007

Member
Aug 2, 2020
5
Dallas, Texas
Thanks but I have tried all of this and it just does not give me the option to turn it on or enable it. I have emailed my builder to assistance. For tonight I have just turned on the pump on medium and I guess will let it run all night since its going to be in the 20's tonight.
 

fagin007

Member
Aug 2, 2020
5
Dallas, Texas
Thanks but I have tried all of this and it just does not give me the option to turn it on or enable it. I have emailed my builder to assistance. For tonight I have just turned on the pump on medium and I guess will let it run all night since its going to be in the 20's tonight.
Scratch that I figured it out how to turn it on and now I feel better thanks..