Hayward Aquavac 650

Richard C

New member
Jun 14, 2021
4
Philippines
Hello. I have an all tile pool with 90 degree floor to wall connections. My Aquavac will not climb the walls. It just bumps into the wall and tries for a while spinning its tires and then backs off. It probably does not help that the tiles area glass surface and somewhat slippery. Does anyone know of any solution to get an Automatic Vacuum to roll up these type of 90 degree intersections.
 

cowboycasey

Gold Supporter
LifeTime Supporter
TFP Guide
Jul 3, 2013
8,648
Southern OK
Pool Size
15000
Surface
Vinyl
Chlorine
Salt Water Generator
SWG Type
CircuPool SJ-40
Welcome to TFP :)

What model do you have? If it does not go up the wall now I am not sure you can do anything to change what it is doing.. I have an active 60/m600 and it will go up my ladder that has a 90 degree but it does not do it all the time..
 

Richard C

New member
Jun 14, 2021
4
Philippines
Welcome to TFP :)

What model do you have? If it does not go up the wall now I am not sure you can do anything to change what it is doing.. I have an active 60/m600 and it will go up my ladder that has a 90 degree but it does not do it all the time..
I have the Hayward 650 Aquavac. I've resigned myself to it cannot make the 90 degree transition, especially with a smooth tile floor that limits traction.
 

Charles Bezzina

Well-known member
Jul 10, 2021
82
Sydney Australia
Pool Size
38000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Hayward Aqua Rite (T-9)
Hi Richard.

My av 650 can't get up the 90degree transitions of my pools fully tiled surface either.
 
Thread Status
Hello , This is an inactive thread. Any new postings here are unlikely to be seen or responded to by other members. You will get much more visibility by Starting A New Thread