Hayward app issues

John_H

New member
Jan 21, 2021
2
Florida
Moved from here.
Hey all, just installing the daughter board on my AquaRite 900 / Omnihub system and have an issue with the app not showing all the diagnostic values. Similarly the Omnihub diagnostic screen only shows limited information - seems like a firmware issue. Running firmware R.3.2.1 on my Omnihub but don't see anything about this issue in the release notes for R.4.0.1 - I'm always a bit hesitant to update firmware. Separate issue, with the change in DST my Omnihub is now ahead by 1 hour. I can correct it manually, but the when I switch it back to automatic it jumps an hour ahead. Timezone is set correctly. Any insight on these two issues?
 

Attachments

  • Screenshot_20211120-133622_OmniLogic.jpg
    Screenshot_20211120-133622_OmniLogic.jpg
    92.7 KB · Views: 9
Last edited:

ajw22

Gold Supporter
TFP Guide
Jul 21, 2013
29,667
Northern NJ
Pool Size
35000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Pentair Intellichlor IC-60
Welcome to TFP.

Reports are the DST feature is flaky in various Hayward automation. I would just update it manually.

 

John_H

New member
Jan 21, 2021
2
Florida
Welcome to TFP.

Reports are the DST feature is flaky in various Hayward automation. I would just update it manually.

Thanks for the reply. I contacted Hayward shortly after posting here; and by coincidence it updated to the correct time shortly thereafter. Did someone just forget to flip a switch?