glass tile questions

Goldeez

New member
Jan 29, 2021
1
florida
My saline glass tile pool was built in 2012. I have had problems with the black grout coming off everywhere. I hired a new pool company three years ago I had the pool drained and re-grouted.(over $6,000.00) Now three years later the grout is coming off again. There is black everywhere in the fountains and hot tub. You rub your hand against the side and the grout just comes off in a big puff of black. This is the pool service estimate. What is the problem here? Any expert advice would be greatly appreciated. Don't want the same problem again in three years.

PROPOSAL



Drain Pool/SPA to applicable area.

Water blast tiles to remove loose grout.

Apply commercial grade grout. Color: Onyx.

Refill Pool and rebalance chemical including salt.



The process will take 5 to 7 days to be completed.



Total Cost includes parts and labor:4,000.00.



50% due before start

50% upon completion

I RX-10323431_0_BimRbN_l.jpeg
 
Welcome to TFP.

Water blast tiles to remove loose grout.

They should scrape out all grout not just water blast loose grout. Putting new grout on old materials that are coming loose will just have problems later.

Apply commercial grade grout. Color: Onyx.

What specific materials are they using? Are they using an epoxy grout like...

 
Last edited:
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.