Frame Supports Sinking

Cricket

New member
Jul 8, 2010
3
Help!

I have a 15x30 above ground pool that I built last week. Since filling the pool the diagonal frame supports in the mid section have sunk about 1” on both sides of the pool. Due to the sinking of the diagonal supports sinking the vertical supports in the mid sections have raised above the pavers about ½”. The walls with the radius are still level and plumb. The ground was level during construction and I did put 12x12 concrete pavers under all of the supports on the pool.

I am currently building a deck around part of the pool and am hoping that there is a fix without staring over.

Thanks for your help in advance.
 

Bama Rambler

Mod Squad
TFP Expert
LifeTime Supporter
Jun 22, 2009
23,060
SouthWest Alabama
Welcome to TFP.

Maybe some of the construction experts will see this and respond but it would help if you could post some pictures of the problem.
 

Cricket

New member
Jul 8, 2010
3
Checking on the pool this morning, I found one of the pavers supporting the diagonals has snapped in two from the weight. The now broken paver is still below the support.
 

Other Threads of Interest