First readings from Taylor K2006C kit

[poolnoobgrandma]

So, fill was one week ago, and PB is handling chemicals for the first month. Then we can add salt and the SWCG will start lifting a lot of the load.
There's a chlorine floater with disks in it.
Our instructions have been to sprinkle a one-pound bag of "Super Zappit" shock into the pool 2 days after the filter start up (did that last Sunday), and add 1/3 gallon of muriatic acid every three days. (Last acid was added on Wednesday night)
Current readings (I didn't do them all)
FC 5.4 ppm
CC 0
Ph 7.0
Base demand test to raise ph to 7.3 - 2 drops

PB rep and pool maintenance guy will be over today. Pool is clear and getting nice and blue. Thoughts?

Thanks in advance!

 

[Mr Bruce]

Can you do the entire test please?
FC
CC
pH
TA
CH
CYA

You can use a 10 ml sample for the FC/CC test, and each drop is 0.5 then instead of 0.2

Is this a new pool or resurface?

 

[poolnoobgrandma]

Brand new pool.
FC 5.4 ppm
CC 0
Ph 7.0
TA 80
CH 21
CYA 33 (?) about a third down from 30