Extra Wide pool Skimmer

May 5, 2017
5
New Lenox
#1
I have a Wil-Bar Morada Option IV pool. It has a wider than normal skimmer opening. I originally purchased a standard Hayward wide mouth and its way to small.

In ID if I measured right is some 12 Inches x 5.5In

Anyway I can't seem to find anything. The pool is from 2007.

Any suggestions on where to look or what to measure becasue its bigger that normal ;)
 
OP
OP
M
May 5, 2017
5
New Lenox
#4
Turns out nobody can seem to identify this stupid thing. iD is 12in outside is 16. The back attaches to the pool wall. So there is like two sets of screws to attach the outside to the pool wall.

i have never seems anything like this, any ideas
 

JamesW

TFP Expert
Mar 2, 2011
13,074
#7
You might want to contact Wilbar directly. They should be able to help.

There should be a part number stamped somewhere on the skimmer or faceplate.
 
OP
OP
M
May 5, 2017
5
New Lenox
#8
So it turns out nobody can identify this, no replacement can be found, but I did find this metal plate that can be used to replace rusty sidewall that will allow me to change from their crazy size to normal

Pool Wall Repair Products - Fair Oaks Products

thought I'd share with everyone in case others have this problem or have a rusty skimmer or return

thanks everyone so happy I found this forum I will be back when it's time to condition the water