Hi i need some help with my pump. I drained out, cleaned and refilled my pool. Pump was working fine and has air pocket by basket. I opened the basket to add water and close it back. Restart the pump and SVRS light comes on and AMPS TOO HIGH. I cut it off wait 10mins and cut it back on and i hear a pop. Now the run light just flashes green and pump will not work. Any idea what issue could be?
Ecotech VS pump issue
- Thread starter Okegs4ever
- Start date
- Jul 21, 2013
- 52,475
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
As you found with this thread it may be time to cut you losses and get a pump from a more reputable company.
www.troublefreepool.com
Ecotech EZ motor failure
I have a 2-year old Ecotech variable speed pool pump motor that just failed. The run/start button flashes green continuously and the other buttons and the display do not work. I tried a factory reset and power cycling, but that did nothing. The shaft turns freely when disconnected from the...
www.troublefreepool.com