Purchased a new home which has a salt generator which is powered without a timer. will the flow sensor stop the operation of the generator when the pump stops. The pump is a vs with its own programmable timer. Any suggestions?
Controlling operation of a chlorine generator
- Thread starter Andrew Howard
- Start date
- May 3, 2014
- 58,383
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
The flow switch is the secondary safety device. We suggest a timer be installed for the SWCG or the pump run 24/7.
Thank you, I didn’t know if there was an add on control or relay that could turn on the salt generator
- May 3, 2014
- 58,383
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Not with the Intelliflo. Pentair automation is your only choice for something like that.