I believe I have debris stuck inside one of my Jandy Never Lube diverter valves. My question is: Can I just pop off the handle, unscrew the 8 screws and take the lid off to dismantle it? Is there anything I need to prepare myself to go wrong? Like do I ALWAYS have to replace the o-ring, or whatever seals the valve? Any input would be appreciated. It just seems too simple to be true, you know what I mean?
Cleaning Out Jandy Diverter Valve
- Thread starter MrLeadFoot
- Start date
As long as the pad is above water level it shouldn't be a problem. As far as needing parts, If it wasn't leaking you shouldn't have an issue putting it back together. Don't over tighten and criss cross all around evenly.
- Jul 21, 2013
- 52,475
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Depends how old it is if you will need to replace the O ring. Having Pool Lube to put on the O ring can also prevent leaks.
- Jun 7, 2017
- 9,053
- Pool Size
- 29000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400