Autopilot digital nano - test power module?

piefightclub

Member
May 29, 2021
7
Worcester County, MA
Pool Size
25000
Surface
Vinyl
Chlorine
Salt Water Generator
SWG Type
Autopilot Digital PPC1 (RC-35)
Does anyone have a procedure to test power board of the Aquacal Autopilot digital nano SWG, e.g. with a multimeter?

I replaced the interface board as suggested by saltpoolguys, but still have low amps cell warning. I replaced the cell cord as well. The cell has been cleaned. Attached is a picture from the top and bottom of the cell. How does it look? I see that some plates are darker than others. The system was installed 4 years ago. There is no way to see the corners of the plates t

I’m really looking to avoid replacing the cell for $250 only to find out that I have to spend another $300 for the power board.

Thanks!
 

Attachments

  • 41A59762-D262-4743-991A-DE856524E6D2.jpeg
    41A59762-D262-4743-991A-DE856524E6D2.jpeg
    277.9 KB · Views: 2
  • 2BE98622-8472-443C-B025-801F62AB66DD.jpeg
    2BE98622-8472-443C-B025-801F62AB66DD.jpeg
    322 KB · Views: 2
Thread Status
Hello , This is an inactive thread. Any new postings here are unlikely to be seen or responded to by other members. You will get much more visibility by Starting A New Thread