Aqua cool vs Aqua blue mini Pebble?!?!?!

TTT3

Member
Mar 20, 2019
7
Tampa, FL
Hi, I'm a little torn deciding between mini Pebble aqua cool vs aqua blue. I have a big oak tree in back so we will have a lot of shady areas for the pool. My coping is off white (sandstone) and water tile is attached. We're trying to decide which one would be best to go with by tomorrow, which doesn't clash with the water tiles. We want the water color to be turquoise blue, not to light and not to dark.

Any suggestions?!?!
 

Attachments

  • IMG-20190226-WA0023.jpeg
    IMG-20190226-WA0023.jpeg
    511.5 KB · Views: 160
  • IMG-20190314-WA0004.jpg
    IMG-20190314-WA0004.jpg
    51.5 KB · Views: 163
  • Like
Reactions: GregInClaremont
We went with Aqua-cool as we were seeking the same look. We got a chance to see them both in person as our builder had done homes for neighbors in our area and it was really the only way we knew for sure what we wanted. We are very happy with our decision. I also have a build thread in my signature with more detail if you like.
 

Attachments

  • IMG_20180623_133554268.jpg
    IMG_20180623_133554268.jpg
    549.7 KB · Views: 535
  • IMG_20190109_114705179.jpg
    IMG_20190109_114705179.jpg
    539.8 KB · Views: 519
  • Like
Reactions: JeorgiB
  • Like
Reactions: GregInClaremont
I'll definitely do that Kim. I don't know much more about our finish other than it being NPT Stonescapes in Mini "Aqua-cool." You can tell that it has a white base plaster with black gray and blue speckles. We did add some Abalone for sparkle and wish we added the full bag our builder had suggested, especially since he didn't upcharge for it!
 

Attachments

  • 20171211_154506_001.jpg
    20171211_154506_001.jpg
    523.9 KB · Views: 248
  • 20171215_161754.jpg
    20171215_161754.jpg
    427.7 KB · Views: 257
  • 20171211_092551.jpg
    20171211_092551.jpg
    328.7 KB · Views: 261
  • 20171211_154737.jpg
    20171211_154737.jpg
    508.2 KB · Views: 278
Last edited:
I'll definitely do that Kim. I don't know much more about our finish other than it being NPT brand in Mini "Aqua-cool." You can tell that it has a white base plaster with black gray and blue speckles. We did add some Abalone for sparkle and wish we added the full bag our builder had suggested, especially since he didn't upcharge for it!

We were thinking of adding the abalone shells too or the touch of glass to the finish. Still trying to find pictures to decide.
 
Touch of glass, if that is a real glass product, it might be better if it achieves the same effect as Abalone(Bling!!). I believe I read somewhere on here a while back about someone experiencing some rust with their Abalone, maybe there are different grades of it- "Cheap" vs. Good?
 
Last edited:

Enjoying this content?

Support TFP with a donation.

Give Support
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.