Hi Everyone-
I have a large back driveway that is slightly sloped away from my home... I had the driveway replaced a couple years ago and it is in great shape but it slopes ever so slightly to move water away from the house...
So, last year I had a 14 round Summer Escapes metal frame AGP on it and didn't level it and it was off about 2 inches... it didn't bother me a bit, I just use the pool to float around, no kids in it playing, etc.
I want to up my game and put a 24' X 12' X 52" Intex AGP back there this year. It is this exact pool:
https://www.amazon.com/gp/product/B...d01-57fb-afcd-a221f194eaae&pf_rd_i=1272958011
I've been thinking a lot about the various ways to level this pool on concrete and I need some advice please.
Do you think I could get away with just putting varying sizes of wood blocks under the leg/supports?
For reference, here is a photo of where I am going to put it... It will fit perfectly with 1 foot remaining on each side b/c my driveway is 30 feet wide.
The house is a reverse ranch, with the garage door on the left of that image. The drive slopes away from house and also slopes slighly out to the left from the house... if my math is right, it is about 6 inches drop from one end to the other.
Would propping up the legs/feet supports be enough to do the trick? I know that I should probably build a frame and level it with sand, etc. I'm really looking to do this as minimalist as possible.
Any advice is greatly appreciated!!!!
Thanks!
I have a large back driveway that is slightly sloped away from my home... I had the driveway replaced a couple years ago and it is in great shape but it slopes ever so slightly to move water away from the house...
So, last year I had a 14 round Summer Escapes metal frame AGP on it and didn't level it and it was off about 2 inches... it didn't bother me a bit, I just use the pool to float around, no kids in it playing, etc.
I want to up my game and put a 24' X 12' X 52" Intex AGP back there this year. It is this exact pool:
https://www.amazon.com/gp/product/B...d01-57fb-afcd-a221f194eaae&pf_rd_i=1272958011
I've been thinking a lot about the various ways to level this pool on concrete and I need some advice please.
Do you think I could get away with just putting varying sizes of wood blocks under the leg/supports?
For reference, here is a photo of where I am going to put it... It will fit perfectly with 1 foot remaining on each side b/c my driveway is 30 feet wide.
The house is a reverse ranch, with the garage door on the left of that image. The drive slopes away from house and also slopes slighly out to the left from the house... if my math is right, it is about 6 inches drop from one end to the other.
Would propping up the legs/feet supports be enough to do the trick? I know that I should probably build a frame and level it with sand, etc. I'm really looking to do this as minimalist as possible.
Any advice is greatly appreciated!!!!
Thanks!