A&A Pop up's not all working need some help please

beachinmoney

Bronze Supporter
Jun 13, 2013
195
Buckeye, AZ
Hi, I had to replace the A&A Manufacturing 524664 Low Profile 6 Port Upper Housing and Lid Assembly Valve
SKU #: 524664 and also the A&A Manufacturing 540277 Low Profile 6 Port 1-1/2in. - 2in. T-Valve Replacement Parts Kit

everything seems good except only three of the pop ups actually are coming up. I cleaned the filters and don't think it's scaling. HELP????

I think I figured it out. It seems to be where I set the skimmer/drain at...?
 

jblizzle

Mod Squad
TFP Expert
LifeTime Supporter
May 19, 2010
42,990
Tucson, AZ
Could it be that there is some debris stuck in the pop-ups themselves maybe making them not rise? Is the system rotating to the various zones?
 

chiefwej

LifeTime Supporter
TFP Guide
Jun 12, 2011
3,389
Tucson
If you have the tool, you can take them out, disassemble and clean them.

I have the A&A system and there is a lifetime warranty on the pop ups. I hear they no longer offer the warranty, but If you are the original pool owner, depending on when the pool was built, there may be a lifetime warranty on the pop ups.