Very strange......shut off for an AA treatment for a couple days. Worked great all summer. I also unplugged the cell. I have a manual two pole single throw switch.
Anyway today I went to turn it back on and the light started blinking. Said pilot off! Check flow. Turned off pump to see if it would reset. Turn back on.....nothing it still was blinking w/ same message.
The pump pressure is 15 psi and didn't need back washing but I back washed anyway thinking maybe obstruction. Back washed put back to filter and all was good worked. No red blink light,nothing.
Little while later I shut off pump, turned it back on and now it's blinking again with the pilot off! Check flow.
4 hours later n it's still not working.
Any thoughts?
Anyway today I went to turn it back on and the light started blinking. Said pilot off! Check flow. Turned off pump to see if it would reset. Turn back on.....nothing it still was blinking w/ same message.
The pump pressure is 15 psi and didn't need back washing but I back washed anyway thinking maybe obstruction. Back washed put back to filter and all was good worked. No red blink light,nothing.
Little while later I shut off pump, turned it back on and now it's blinking again with the pilot off! Check flow.
4 hours later n it's still not working.
Any thoughts?
