Fiberglass coping stone question

[Ocsurf16]

I just finished pouring the bond beam on my diy install of fiberglass pool. I've searched everywhere on here about gluing/mortar for the paver coping. I have about 5 inch fiberglass lip and then plenty of concrete behind for adhesion for a 12inch cast coping stone. I'd like to use glue to install these after I roughen up the fiberglass surface. What brand/type of glue ? Pl400 is what I was leaning towards

Still trying to figure out how to post pictures

 

[zea3]

I can't help with the glue question but using a photo hosting site like photobucket.com is the easiest way to post pictures.

 

[Texas Splash]

Have you tried linking your photos from Photobucket? That's what many of us do here on TFP. Upload your pics to Photobucket (free), then copy & paste the IMG code for that pic from Photobucket to your TFP post. Works great.

 

[Ocsurf16]

- - - Updated - - -



- - - Updated - - -

Thanks that was easier then I thought , I got all sorts of pictures to share of my diy pool install

 

[Ocsurf16]

Anybody have delt with an install like this?

 

[avc8130]

Anybody have delt with an install like this?

I have not personally, but most of the PB's I've spoken to about coping around a fiberglass pool all say they use construction adhesive to bond the paver to the pool AND the concrete.

ac

 

[keithw]

I did my own DIY fiberglass install as well and put down cantilevered flagstone. I did my coping similar to yours where it was flush with the fiberglass bond beam. I used mortar to hold mine down. I mortared right over the fiberglass bond beam and onto the cement. I did use a bonding agent on the flagstone and on the cement/pool as well. Has held down for a few year just fine. No issues.