Underwater cloudiness

[TN94z]

pH-7.5
FC-6.5
CC-0
TA-90
CH-70
CYA-50

The CYA is low but I have added stabilizer a day or so ago, so it is just not showing up yet. The TA is a tad high and the FC is a little high as it is coming down from the SLAM I did after opening. The pool looks as clean as ever, water is extremely clear, and you can see the bottom no problems. But when you go under, it's fairly cloudy. Any suggestions?

 

[pooldv]

Raise chlorine up to 10ppm, turn off the SWG and Perform the Overnight FC Loss Test (OCLT) to see if there is any organic matter or algae in the pool consuming chlorine.

 

[TN94z]

It just passed the OCLT a couple days ago with no problems. Do I need to do it again?

 

[Richard320]

It might just be a matter of

waiting for the sand filter to get the superfine stuff strained out. You could always try Pool School - Add DE to a Sand Filter




Pool Owner Patience

 

[TN94z]

Yeah Ive got some DE but have not added it this year yet. It may just be patience. I'll keep and eye on it and update in a few