I just purchased a K-2006 Complete FAS-DPD chlorine test kit. That was before I found this web site, which suggests the T-100. Have I made a mistake? I am looking for a kit to monitor my CYA levels. I have a 24 ft diameter above-ground vinyl pool. .
The right Test kit?
- Thread starter John Barthel
- Start date
- Jun 12, 2011
- 3,763
- Pool Size
- 19500
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pureline Crystal Pure 60,000
That kit will work fine. In fact, it's what many (if not most) pool service professionals use. The major advantage of the T-100 is that it provides more of the reagents most commonly used, so it generally a much better value for the residential pool owner.
Welcome! 
Nope, it'll work. It has the same reagents as the TF100, just smaller quantities, hence, lower price. Side by side comparison in Pool School - Test Kits Compared
Nope, it'll work. It has the same reagents as the TF100, just smaller quantities, hence, lower price. Side by side comparison in Pool School - Test Kits Compared
- Jun 22, 2014
- 47,789
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Hello John! I'm right down the road from you. Welcome to TFP. You're in the right place for rock-solid advice. Have a nice weekend.
Saturn94
Bronze Supporter
- Mar 11, 2015
- 1,746
- Pool Size
- 20000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
Similar threads
