Converting to SWG this weekend.

[pmaroun]

I am converting my pool to use an SWG this weekend.

I am learning as I go, but I am assuming that my pool is not bonded. I see no bonding wires on the heater or pump. I also have some fiber optic lighting and do not see any bonding wires for this either.

When installing the SWG, is there anything I should do for the bonding wire? Does adding an SWG add additional risk if this is not bonded?

Regards,
Pete

 

[laveenmoose]

Hi Pete, I'm not an expert on this subject but here is a link that should help - http://www.troublefreepool.com/threads/33849-Install-SWG-this-weekend-bonding-wire-question.

Someone with the requisite expertise should be along shortly

 

[pmaroun]

thanks for the reply! I saw that post when I was searching for this answer.. However, in my case, I have no existing bonding wires that I know of. Wasn't sure how to proceed or if it was safe for me to ignore for the time being.

Hi Pete, I'm not an expert on this subject but here is a link that should help - http://www.troublefreepool.com/threads/33849-Install-SWG-this-weekend-bonding-wire-question.

Someone with the requisite expertise should be along shortly