I just install a newCircuPool Si30 system. When I first turned it on it reported salt level very close to water test at 3800ppm an hour later it reports 900 now 100 for 2 days now. The water tests out at 3800ppm, the diagnostic reads -0000 for salt, I get a green light that it is generating chlorine , set at 75% but so far chlorine tests low. Water temp is 73F.
Should I be concerned that the system is not reporting salt level correctly as long as chlorine is produced?
Should I be concerned that the system is not reporting salt level correctly as long as chlorine is produced?