Can anyone recommend the optimal vacuum hose length for an Ultra Frame pool 32X16X52. I don't want to get one that is too long. Cheers
Vacuum hose length for 32X16 Ultra Frame pool
- Thread starter Rich1
- Start date
Welcome Rich!
To be honest, I'd rather have one too long than too short. I mean, wouldn't you?
To be honest, I'd rather have one too long than too short. I mean, wouldn't you?
Propbndr
LifeTime Supporter
Where are your skimmers located? You need a hose that will reach from the skimmer basket you will use for vacuuming to the farthest corner while walking around any obstacles. I also have a 16 x 32 pool and have a 40' hose. My skimmers are approximately 6' from either end of my pool. With that skimmer placement, that length gives me plenty of length to reach around the pool with plenty of slack at the farthest point.
- - - Updated - - -
OK. A longer hose is better
How about the brushy thing that you use to sweep the bottom of the pool. Is there a particular type that is better for an AGP?
Propbndr
LifeTime Supporter
I use the following for sweeping and vacuuming (no shameless advertising, links used to show what I have):
http://www.homedepot.com/p/Poolmaster-Flexible-Pool-Brush-20174/100615492
http://www.shopthepoolandspacenter....pool-vacuum-hydrostatic-valves-brushes-b5501/
Both work well for me.
http://www.homedepot.com/p/Poolmaster-Flexible-Pool-Brush-20174/100615492
http://www.shopthepoolandspacenter....pool-vacuum-hydrostatic-valves-brushes-b5501/
Both work well for me.
Propbndr
LifeTime Supporter
