I have a pentair easy touch control panel p/n 520474 Rev d. I also have an intelliclor inline clorinator. I unplugged the chlorinator and when I plugged it back in the display on my easy touch panel went out. Also none of the buttons on the panel work now either. If I turn the circuit breaker off and on the display will backlight will lightly turn on but the display itself displays nothing and the buttons don't work no matter what I do. Anyone have some suggestions?
Pentair Easy touch Display and buttons stopped working
- Thread starter raiderfib
- Start date
Welcome to TFP!
The obvious thing to try would be to unplug the chlorinator again and see if that makes any difference.
The obvious thing to try would be to unplug the chlorinator again and see if that makes any difference.
It did not make a difference, I forgot to mention the chlorinator no longer lights up and the gfci switch on the side of the panel does not do anything either.