Hi all been using the bleech method for several months now and couldnt be happier pool stays crystal clear and i finally feel i have some sort of control on whats going on in there after many hours of reading on here and learning lots of usefull information . My question is my T/A has dropped to 30 as checked today doesnt seem to be making any problems my ph raises from 7.4/7.5 to 7.8/7.9 over about 8-10 days then i put 2 litres of 31% MA in drops it back to 7.4/7.5 on it goes i understan this is lower the T/A over time just wondered at what point you start adding baking soda as in lower parameters for T/A or just get it back up to around 50 then every time i put MA in put a bit of baking soda in to off set the effect of the MA.
Thanks in advance for any help
PH 7.7
CL 5.0
TA 30
CH 220
CYA 38
Water Temp 19.5°C (much cooler than normal)
Thanks in advance for any help
PH 7.7
CL 5.0
TA 30
CH 220
CYA 38
Water Temp 19.5°C (much cooler than normal)