We had a big lightening strike at the heater area. Has not worked since. Looks like an error code PR 6. Does not click anymore when I try to turn it on. I think its the board. Any ideas?
Hot tub draining back to pool
- Thread starter tommy ray
- Start date
I REPLACED THE CHECK VALVE BUT IT STILL LEAKS BY WHEN THE PUMP IS OFF. I CAN CLOSE A MANUAL VALVE AND STOP IT BUT WHEN PUMP COMES BACK ON THEN MY SPRAYERS COME ON TILL i GO OPEN THE VALVE. I ONLY PUT A NEW FLAPPER NOT THE WHOLE VALVE BODY.
WHY ARE YOU YELLING AT ME!?!?!
Welcome to TFP!!!
If you can close a valve and stop the draining, then it seems like you have isolated the problem. The check valve or a 3-way valve must still be leaking.
Welcome to TFP!!!If you can close a valve and stop the draining, then it seems like you have isolated the problem. The check valve or a 3-way valve must still be leaking.
boston62
LifeTime Supporter
Was the correct flapper installed to the right body of the check valve? I had this happened to me Jandy flapper on Compool check valve body...won't work.
Sent from my SCH-I535 using Tapatalk
Sent from my SCH-I535 using Tapatalk
Great thought, its a Jandy valve body and not sure about the new flapper. Will check that out. Thanks
- May 22, 2013
- 2,796
- Pool Size
- 12000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
Welcome to the forum Tommy
Can you please add your info to your signature as outlined here - > http://www.troublefreepool.com/content/165-getting-started
Can you please add your info to your signature as outlined here - > http://www.troublefreepool.com/content/165-getting-started
Similar threads
