I recently had a new liner put in. After filling the pool up I noticed the liner was pulling away from all the corners of my grecian shaped pool. This looks like great place for a tear to happen. I usnderstand the liner needs to stretch a little but this seems like a little too much for me.
I've been given conflicting assessments. The installer says it's fine, my buddy who installs liners says that the liner was cut too small, which is evident by the floor seam not reaching one side of the pool. The seam should be tucked into the corner, but it is not, it is a good 4 inches off on one side. The other side is fine.
Please take a look at the video:
http://youtu.be/st9nZrTSEBc
Any insight is appreciated!
DD
I've been given conflicting assessments. The installer says it's fine, my buddy who installs liners says that the liner was cut too small, which is evident by the floor seam not reaching one side of the pool. The seam should be tucked into the corner, but it is not, it is a good 4 inches off on one side. The other side is fine.
Please take a look at the video:
http://youtu.be/st9nZrTSEBc
Any insight is appreciated!
DD