We just had to replace our Intex SWG after 2 1/2 years( was under warranty so we just got a new one for free). The water is sparkily, Water so clear you could see a needle laying on the bottom!! Confusion comes here:
Total Hardness 200
Total Chlorine 3
Total Bromine 5
Free Chlorine 2
Ph 6.4
Total Alkalinity 100
CYA Under the low color!
I did the calculator to find out what to do.....says to add 367oz. Borax and 158oz. liquid stabilizer. I want to use the 20 mule team borax and muriatic acid. From what I am reading the borax will raise ph too high...is that why I use the Ma...to conteract the rise in ph? I swear by SWG!!! We have never had so many people just marvel at the condition of our pool!
Thanks for everyones assistance on this board! I learn the most lurking on this forum!! Gods blessings to you all!
Total Hardness 200
Total Chlorine 3
Total Bromine 5
Free Chlorine 2
Ph 6.4
Total Alkalinity 100
CYA Under the low color!
I did the calculator to find out what to do.....says to add 367oz. Borax and 158oz. liquid stabilizer. I want to use the 20 mule team borax and muriatic acid. From what I am reading the borax will raise ph too high...is that why I use the Ma...to conteract the rise in ph? I swear by SWG!!! We have never had so many people just marvel at the condition of our pool!
Thanks for everyones assistance on this board! I learn the most lurking on this forum!! Gods blessings to you all!