Diving Board Identification and Replacement

[ssmartt]

So I bought this house on 4/30, and it had that swamp out back. Well apparently someone, according to the original PB I found by chance, a contractor who wanted it for scaffolding, stole the diving board but left the base. I held out hoping it was at the bottom of the deep end, but thanks to this website, I can see down there now, and well, it's not down there.

I did some investigative work and I think what I've got is a SR Smith Flyte-Deck II, the best-selling model of the biggest manufacturer of diving boards. Makes sense I guess, makes it easy. 11-01 is likely the manufacture date as the pool is from 2002 (written in concrete pool equip pad and matches up w/ filter manufacture date)

Here's the promotional material for the diving board:
http://www.srsmith.com/media/47124/flyte-deckii_011314.pdf
I guess I need to measure the length from bolt to fulcrum to see if I need a 6' board (I'm assuming that's what I'll need)

I think this is what I'll probably order unless someone has a better suggestion:

http://amzn.com/B002D48HHE "The Fibre-Dive board retrofits onto the Flyte-Deck II and U-Frame style stands"


Here's some pictures of my diving stump:

I guess I'm just looking for someone to tell me that there's not a bunch of identical diving board bases that look just like mine that won't fit right.



edit: patiently waiting for USPS to forward the package that has the 12V halogen bulb I need for that pool light. The ebay seller I bought it from first sent a 120V bulb. Now I've moved and nobody seems to know where the package is.

 

[TGMcCallie]

Look at AO Smith diving board stands. Mine is exactly like this and you can use any 2 bolt diving board.

 

[ssmartt]

Thanks! I googled them and AO smith appears to be the same as SR smith. Weird.