Hi All,
i am replacing my older AquaPure 1400 with the newer 3 port model and I have to cut out the smaller unions and sensor fitting. I have a straight section of about 30 inches. That leaves about 10+ inches for some other form of purifer. Should I consider adding an additional device like a chlorine puck feeder or mineral thing? Why would I want to do this? the pool water is warm most of the summer and it seems that the chlorinator has had a bit of a time keeping up. And over the winter, I have to add pucks since the water is too cold for the chlorinator to function.
I might be thinking too hard about this, but since I will have it all cut up, I thought I might ask if there are any suggestions you all have.
Thanks! Chris
i am replacing my older AquaPure 1400 with the newer 3 port model and I have to cut out the smaller unions and sensor fitting. I have a straight section of about 30 inches. That leaves about 10+ inches for some other form of purifer. Should I consider adding an additional device like a chlorine puck feeder or mineral thing? Why would I want to do this? the pool water is warm most of the summer and it seems that the chlorinator has had a bit of a time keeping up. And over the winter, I have to add pucks since the water is too cold for the chlorinator to function.
I might be thinking too hard about this, but since I will have it all cut up, I thought I might ask if there are any suggestions you all have.
Thanks! Chris