I searched but couldn't find what I was looking for.
I do not understand the difference between the timer settings and Speed settings. Both have speed and length of time to operate.
Here are my settings:
Timer:
Low: 1400 10pm to 3am 7D
Cleaning: 2350 3am to 7am 7D
Timer 3: 1950 9:30 to 5:30pm Saturday. This is only used when we're in the pool We like circulating water when using the pool and it's the only way the spillway from the spa to the pool works.
Speed:
Speed 1 1400 5 hours
Speed 2 2350 4 hours
Speed 3 1950 8 hours (only as desired)
Speed 4 (Backwash) 2800 30 minutes
We live in Scottsdale,AZ where it's really hot. We run the pump at night and for a lot longer than less hot areas.
What do I look at when setting the pump to run? The timer settings? The speed settings? Which is default?
The owner's manual is one of the worst manuals I've read. It give what each thing is but not how or why or which to use.
Thanks!
I do not understand the difference between the timer settings and Speed settings. Both have speed and length of time to operate.
Here are my settings:
Timer:
Low: 1400 10pm to 3am 7D
Cleaning: 2350 3am to 7am 7D
Timer 3: 1950 9:30 to 5:30pm Saturday. This is only used when we're in the pool We like circulating water when using the pool and it's the only way the spillway from the spa to the pool works.
Speed:
Speed 1 1400 5 hours
Speed 2 2350 4 hours
Speed 3 1950 8 hours (only as desired)
Speed 4 (Backwash) 2800 30 minutes
We live in Scottsdale,AZ where it's really hot. We run the pump at night and for a lot longer than less hot areas.
What do I look at when setting the pump to run? The timer settings? The speed settings? Which is default?
The owner's manual is one of the worst manuals I've read. It give what each thing is but not how or why or which to use.
Thanks!