Can't prime pump!

Re: Leaking tank but no visible problem

Make sure the drain plug at the bottom of the filter is not cross threaded and is snug. Turn off the pump, shut off any valves between the pool and the filter then check the plug.
 
Re: Big filter leak

I don't even see the drain plug so I'm guessing it's on the back which is about an inch from the house and impossible to get to. OF COURSE
Parts 9 & 10. Should be accessible.

pumps_pentair_hydropump.gif
 
From the picture you posted earlier, yes the drain plug is next to the house. See if you can feel back there and tell if that is where the water is coming from. If it is, then you will need to tighten the plug. Also when it is light out run the pump and see if you can find water dripping or spraying out anywhere around the filter or heater.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.