I have a 20x32 in ground steel wall which I would like to make it to a 20x40. I was thinking of doing it on cement block due to money savings. Also two of the walls are getting pushed in and it need completely new plumbing and electrical which is where I need some help. I seen a few cement block pools but nothing really helpful. I work construction on the side and a mechanic for a full time job. Any help would be nice
Need advice to remodel steel wall to concrete block pool
- Thread starter M3power1
- Start date
Welcome to TFP.
take a look at Dave's (Duraleigh) pool build thread. That should give you some reading material. You're basically going to e building a new pool.
take a look at Dave's (Duraleigh) pool build thread. That should give you some reading material. You're basically going to e building a new pool.
Welcome to TFP!!!Here is the thread Dave J. was referring to for Dave S. pool build:
an-unusual-pool-build-t10597.html
Thanks. The is one nice big pool. Any recommendations on equipment? Was thinking an SWG, but not sure. I would like to start getting all the materials I will need during the winter.
Filter size recommendations are based on pool volume. For the pump, a 1 hp 2 speed is likely plenty big, unless there are some high flow needs we are not aware of.
Size the SWG cell for 1.5 to 3 times the volume of your pool.
Size the SWG cell for 1.5 to 3 times the volume of your pool.