- Jun 16, 2013
- 8
I screwed up, I decided to try and save some money and attempted to install a new 4 button switch on my spa. I read some of the articles and decided to try and connect the new 100' of 6 prong wire to my old wire. I looped it, taped it and started to pull it through to the control panel.
I got about 50 to 60' out and you guessed it. it broke, I pulled the old out one end and the new the other.
NOW, I've read about connection a vacuum to one end and sucking a string through, will this really work ?
Can you use a plummers snake and push it through and connect the wire.
Need some help, i have a $200 switch setting on my bench laughing at me.
Thanks for any suggestions.
Bill Kissick
817-442-9689 - hse
913-484-5612 - cell
I got about 50 to 60' out and you guessed it. it broke, I pulled the old out one end and the new the other.
NOW, I've read about connection a vacuum to one end and sucking a string through, will this really work ?
Can you use a plummers snake and push it through and connect the wire.
Need some help, i have a $200 switch setting on my bench laughing at me.
Thanks for any suggestions.
Bill Kissick
817-442-9689 - hse
913-484-5612 - cell