My TA is zero???

Jun 29, 2013
3
Have a intex 15 x 42 pool. With the little pool filter system that it comes with.
Had my water tested cause after battleing algae at the opening of the pool it is still cloudy.
Leslie's water analysis report
Free available chlorine. LOW 0
Total available chlorine. LOW 0
Calcium hardness. OK. 200
Cyanuric acid. OK. 60
Total alkalinity. LOW. 0

Any suggestions?
Leslie's suggested ALKALINITY UP 8 - 10 lbs?
Does anyone know if this sounds right or not?
Thank you for any help
 
First welcome to TFP.

Second don't let the pool store test your water.

Third get one of our recommend test kits. The TF 100 is a good one.

Fourth. Read pool school.

What was your PH ? Get some chlorine in there also.


Sent from my iPhone using Tapatalk.
 
The sales person said their test only went down to 6 on TA and my sample was below that
Have been adding Chlorine daily. System uses the 1" tabs in the filter. Been adding 4 or 5 daily as they dissolve.
Read pool school and other topics when had an algae issue at start of the season. Was very helpful in clearing up that issue.
 
If you want to use the BBB method you need to test your own water with one of our test kits. It's all about you taking control of your water chemistry.

Remember the pool store is in business to sell you things you don't need like those pucks. .


Sent from my iPhone using Tapatalk.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.