It should be, but like I said, algae can be killed. If the TA adjustment helps with the pH, then chlorinate.karenkolby said:
1st test results
- Thread starter karenkolby
- Start date
In the meantime of adding the soda, can I wait 30 mins and add some bleach. Not sure if FC of zero should be concerning me ....
Also, is running the pump/filter constantly causing further problems?
Also, is running the pump/filter constantly causing further problems?
Ok thanks! The neighbor is going to the house to move the socks off the wall and tie them to a noodle. I'm also gonna have her add 40oz of baking soda (half of what pool calc recommends). I will test it again when I get home tonight.
Assuming TA is coming up, at what TA number do I chlorinate?
THANKS!!! (If I get home before dark, I promise to take pictures)
Assuming TA is coming up, at what TA number do I chlorinate?
THANKS!!! (If I get home before dark, I promise to take pictures)
I have to go to Wally World on my way home anyway ... since my FC is 0 and pool calc says to get to a FC of 4 I need to add 88oz of 6.25% bleach, is there any harm in my adding this instead (at a lower dosage of course) http://www.walmart.com/ip/HTH-2pk-Liqui ... r/17043617 ?
Assuming my TA level is rising along with pH (b/c of the baking soda), what do these numbers need to be for me to chlorinate?
Assuming my TA level is rising along with pH (b/c of the baking soda), what do these numbers need to be for me to chlorinate?