pool test results. Any suggestions

[buckhunter835]

pool is crystal clear. should i try to adjust anything.

June 3, 2013, 07:50 am

FC 4.0
CC 0
PH 7.8
TA 210
CH 240
CYA 60
SALT no test
ACID no test
IRON no test
TEMP 70*

Thanks for the help

 

[Bama Rambler]

Where did you get those test results?

I'd probably bring the pH down to about 7ish.

 

[jblizzle]

should i try to adjust anything.

Depends if you trust the pool store testing ... we generally do not, and put much more faith into performing our own reliable and repeatable testing using one of the recommended test kits.

 

[Richard320]

Lower pH a bit, because with the SWG and high TA, it will soon rise.
http://www.poolcalculator.com/ can help. Scroll to the bottom of the table where it says suggested goal levels and enter troublefree, SWG, and vinyl.

 

[buckhunter835]

thank you for the help,
sorry for late reply got called into work.
I did the test, I purchased the testing kit from this site tl100?
I will lower ph using pool calculator.

what is the proper way to use m.a. pump running or off?

 

[roadking00]

Pump running and poor slowly into deep end in front of return jet....I hold my breath from the fumes most of the time and wear spoggles while pouring....helps a lot....

And with a CYA of 60 pool calc says FC should be between 5-9ppm so ya may wanna bring it up a bit....

Sent from my DNA using Tapatalk

 

[buckhunter835]

OK THANK YOU. I WILL GO DO IT NOW