Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 11 of 11

Thread: Universal, gas grill replacement burners - any good?

  1. Back To Top    #1
    seadogg's Avatar
    Join Date
    Sep 2007
    Location
    Southeast Texas
    Posts
    30

    Universal, gas grill replacement burners - any good?

    I'm talking about the "H" pattern ones they sell at the Marts, the Borgs, even grocery stores this time of year. Has anyone had any luck getting them to fit and work right? The best price I can find on the internet for manufacturers brand replacement burners is $148 a set. Might as well buy a whole new grill...except I don't want to buy a whole new grill. This one is still in great shape after only two years (except the burners and burner grease deflectors.)

    I thought about making some from s/s pipe, but the thought of drilling all those tiny holes for four new burners has led me to try and find an alternate solution (Maybe that's the excuse I'm looking for to get the new drill-press )

    I mostly use an offset firebox smoker, but my wife likes to use the charcoal grill for chicken breasts, dogs & burgers (she likes to do things NOW), and you know what they say, "If Mama ain't happy, ain't nobody happy"

    Thanks, Jim
    Doughboy 16x32 AG with deep end (15,000 gal.)
    Hayward Power-Flo Matrix 1.5 HP pump with 22" sand filter.

  2. Back To Top    #2
    whoozer's Avatar
    Join Date
    Apr 2008
    Location
    Acton Maine
    Posts
    633
    What kind of grill do you have?
    14x33 fiberglass freeform
    Variable speed Pentair intelliflo superpump
    420 Clean and Clear Plus cartridge filter.
    pool-school/pool_calculator , http://www.tftestkits.net/

  3. Back To Top    #3
    MikeInTN's Avatar
    Join Date
    May 2007
    Location
    Middle Tennessee
    Posts
    1,335
    I've had good luck with them when I was replacing an "H" burner. They'd last a year or two, just like the original. The grill I have now has stainless tube type burners, and I can't use the "H" type with it.
    24' x 52" AGP - approx 13,500 gallons
    Pentair Optiflo 1 hp/2sp pump w/ Swimpro Voyager 150 sq ft cartridge filter
    Intex 8110 SWCG
    "Fear the Schnauz!"

  4. Back To Top    #4
    seadogg's Avatar
    Join Date
    Sep 2007
    Location
    Southeast Texas
    Posts
    30
    I've had good luck with them when I was replacing an "H" burner. They'd last a year or two, just like the original. The grill I have now has stainless tube type burners, and I can't use the "H" type with it.
    Mine are the non-stainless tube type.
    Attached Images Attached Images
    Doughboy 16x32 AG with deep end (15,000 gal.)
    Hayward Power-Flo Matrix 1.5 HP pump with 22" sand filter.

  5. Back To Top    #5
    MikeInTN's Avatar
    Join Date
    May 2007
    Location
    Middle Tennessee
    Posts
    1,335
    Quote Originally Posted by seadogg
    I've had good luck with them when I was replacing an "H" burner. They'd last a year or two, just like the original. The grill I have now has stainless tube type burners, and I can't use the "H" type with it.
    Mine are the non-stainless tube type.
    Hmmmm....I don't know if it would work or not. Two burner grill, i take it? You could probably make it work, as the venturi tubes on the replacement "H" burners are flex type tubes, and not rigid.

    BTW, if you still have the paperwork on your grill and they have a customer svc #, call them and see what new burners would run you. I checked around the 'net for some parts for my grill, then called the manufacturer's customer svc line for some I couldn't find, and discovered that I could get all the parts I needed for roughly 50% less than what the online stores wanted.

    EDIT - My bad. I re-read your original post, and see that it's a four burner grill. Do you have space for two of the "H" burners?? I'd still call the manufacturer's 1-800# and see what they charge for them.
    24' x 52" AGP - approx 13,500 gallons
    Pentair Optiflo 1 hp/2sp pump w/ Swimpro Voyager 150 sq ft cartridge filter
    Intex 8110 SWCG
    "Fear the Schnauz!"

  6. Back To Top    #6
    seadogg's Avatar
    Join Date
    Sep 2007
    Location
    Southeast Texas
    Posts
    30
    Quote Originally Posted by MikeInTN
    BTW, if you still have the paperwork on your grill and they have a customer svc #, call them and see what new burners would run you. I checked around the 'net for some parts for my grill, then called the manufacturer's customer svc line for some I couldn't find, and discovered that I could get all the parts I needed for roughly 50% less than what the online stores wanted.

    Thanks, that's good to know. I wouldn't expect the manufacturer to sell them for that much less - but I'll sure call them!

    Jim
    Doughboy 16x32 AG with deep end (15,000 gal.)
    Hayward Power-Flo Matrix 1.5 HP pump with 22" sand filter.

  7. Back To Top    #7
    seadogg's Avatar
    Join Date
    Sep 2007
    Location
    Southeast Texas
    Posts
    30
    Quote Originally Posted by whoozer
    What kind of grill do you have?
    Sorry it took so long to answer, it's a BBQ Grillware from Lowes.
    Doughboy 16x32 AG with deep end (15,000 gal.)
    Hayward Power-Flo Matrix 1.5 HP pump with 22" sand filter.

  8. Back To Top    #8
    MikeInTN's Avatar
    Join Date
    May 2007
    Location
    Middle Tennessee
    Posts
    1,335
    Quote Originally Posted by seadogg
    Quote Originally Posted by whoozer
    What kind of grill do you have?
    Sorry it took so long to answer, it's a BBQ Grillware from Lowes.
    I've got the 3 burner BBQ Grillware from Lowe's. Hmmm...I coulda swore mine had stainless burner tubes. Regardless, give them a call. For example, the heat diffuser's that sit above the burners cost $10 a piece from BBQ Grillware. All of the online places wanted between $20 and $30 a piece for them. I ended up ordering a new thermometer, three new heat diffusers, and the mounting brackets for the diffusers, all for around $60.
    24' x 52" AGP - approx 13,500 gallons
    Pentair Optiflo 1 hp/2sp pump w/ Swimpro Voyager 150 sq ft cartridge filter
    Intex 8110 SWCG
    "Fear the Schnauz!"

  9. Back To Top    #9
    seadogg's Avatar
    Join Date
    Sep 2007
    Location
    Southeast Texas
    Posts
    30
    Hey Mike,

    Thanks for the suggestion. It is a 3-burner (GSF-2616), I remembered 4 knobs, forgetting about the side warmer and I did call them. Found out s/s burners (yes, mine are stainless as well - hard to tell when they're completely wasted!) have a 10 year warranty. So, all they need is a copy of the receipt faxed to them and I'm all set.

    I'm also getting heat plates and brackets. Maybe someday I'll cut some 2-1/4" x 2-1/4" x 3/16" angle iron to make some heavy duty heat plates 8) .

    Thanks, Jim
    Doughboy 16x32 AG with deep end (15,000 gal.)
    Hayward Power-Flo Matrix 1.5 HP pump with 22" sand filter.

  10. Back To Top    #10
    MikeInTN's Avatar
    Join Date
    May 2007
    Location
    Middle Tennessee
    Posts
    1,335
    Quote Originally Posted by seadogg
    Hey Mike,

    Thanks for the suggestion. It is a 3-burner (GSF-2616), I remembered 4 knobs, forgetting about the side warmer and I did call them. Found out s/s burners (yes, mine are stainless as well - hard to tell when they're completely wasted!) have a 10 year warranty. So, all they need is a copy of the receipt faxed to them and I'm all set.

    I'm also getting heat plates and brackets. Maybe someday I'll cut some 2-1/4" x 2-1/4" x 3/16" angle iron to make some heavy duty heat plates 8) .

    Thanks, Jim
    Good deal, glad to hear they took care of you. Uh oh..they require a copy of the receipt faxed to them to honor the warranty? And you still have it? I couldn't even begin to guess where the receipt for mine is, but if I had to, I'd say it's been shredded. The DW gets on these shredding kicks, and just shreds everything she deems "unnecessary". Old receipts fit that description for her. Oh well, that gives me an excuse to upgrade to a new grill if the burners in mine ever give out... 8)
    24' x 52" AGP - approx 13,500 gallons
    Pentair Optiflo 1 hp/2sp pump w/ Swimpro Voyager 150 sq ft cartridge filter
    Intex 8110 SWCG
    "Fear the Schnauz!"

  11. Back To Top    #11

    Join Date
    May 2008
    Location
    florida
    Posts
    112

    Re: Universal, gas grill replacement burners - any good?

    I have the same grill for about 3 years now. So far so good. Glad to hear about 10 year warranty. Hope I have the receipt.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •