Liner sag from coping

[Rangerman]

Anybody know of a safe way to reattach, lift up or otherwise slip the liner top edge back into the coping? I have two or three the worst being about 6 inches with the sag about 1/2 inch. Sure don't want to tear the liner. Your experiences with this little problem?

 

[mnormington]

Is it an IG, AG, overlap, j-hook, etc... I would like to try and help but I need more info about your pool.

 

[Rangerman]

Is it an IG, AG, overlap, j-hook, etc... I would like to try and help but I need more info about your pool.

IG . . . sorta like a tongue (liner) and groove (coping strip).
Liner edge slips into the coping and catches. Don't know the official terms as you can see.

Thanks for any help you can offer.

 

[all your parts]

use very hot water pour it on the liner and than try pulling it up

 

[Rangerman]

use very hot water pour it on the liner and than try pulling it up

That sounds reasonable enough ... thanks.

 

[jwhop3]

Seven years ago, no reply. Musta worked. I need to do the same thing to mine, so I will try the hot water trick too.