Air in Pentair superflo pump and bubbles in pool

Jun 5, 2012
19
Ontario, Canada
Surface
Vinyl
Chlorine
Salt Water Generator
SWG Type
Pentair Intellichlor IC-30
Hi everyone,
I apologize if this has been asked before.
I just opened my pool (only my second time doing this) and I have air in the pump basket and bubbles in the return jets in pool.
Ive tried bleeding air from the filter and and water eventually pours out.
Ive checked the pump basket, lid and O ring and all appear ok.
I'm just hoping I'm missing something and I don't have more serious issues.
Any input or advise is most welcome.
Attached are pictures if they help. (I'm not sure if the valves are opened correctly?)

Thank you in advance.
 

Attachments

  • pump.jpg
    pump.jpg
    151.5 KB · Views: 44
Air in the basket and out of the returns is a classic suction side air issue. Is your skimmer weir door stuck? Are you sucking air into your skimmer (pool level too low)? Other places that air can be sucked in on the suction side...pump basket lid seal (sounds like you checked this), pump drain plugs, leaking unions, leaking joints,etc.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.