Just moved in a new house in Hanford Ca with a 25k pool, S8D110 filter, quikskim, turbo clean in floor system, 1hp motor(new) and waterfall feature. pop ups are leaving debris in all corners and the main drain is not removing debris whatsoever. Just drained and filled and cleaned filters last night to no avail. What should I be looking for to get this up and running correctly?
Just moved in
- Thread starter Turtle
- Start date
elwood58
LifeTime Supporter
First, read pool school. Your valves may be set so they are not pulling from the main drain. This also explains debris left behind by pop ups, as any that does not float just gets pushed around.
Post your test results (full compliment) and send pictures of your pool and equipment pad.
Post your test results (full compliment) and send pictures of your pool and equipment pad.
I will post the pics when I get them tonight. I have the quikskim fully on and the skimmer valve set to 90% main drain but still have debris everywhere. It's my first pool with pop ups as my other house utilized the kreeply krawly. Thanks for the quick response as I want to get this under control before it heats up adn starts leving stains.
I have a Caretaker in-floor system. Always ended up with dirt in a few corners. I would just have to brush occasionally to toward the floor drain or manually vacuum.
Similar threads
