This is my first year I am running a heater. My question is, how do I run it? I have a 24' round pool with a H200 or H250 heater, not sure without going out to look at it. I normally run my pump on a timer. I know that the heater can have a melt down if there is no water circulating while the heater is on. I read somewhere that Hayward has a quick cooldown, not sure if this is true. I also read briefly about a fireman's switch. I did not look into that further as of yet as I don't know if that is the route I need to go. Hoping someone can help me with this one lol.
Hayward heater
- Thread starter kodeblue
- Start date
Tell us more about the timer you have?
You will need a timer with a firemans switch at the very least.
You will need a timer with a firemans switch at the very least.
Is it the millivolt version? Or the electric version with the transformer? (The heater, I mean).
Pretty sure there is a terminal that you can use for a remote switch, but I'd probably put it on a timer with a fireman's switch.
Just seen on pg 13 paragraph 4in the manual, it says heat sinks, firemans switches and check valves are not necessary on H-series heaters.
