Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: Spacesaver Steps.

  1. Back To Top    #1
    Crazycalvin's Avatar
    Join Date
    Mar 2008
    Location
    Irmo, South Carolina
    Posts
    56

    Spacesaver Steps.

    Hello. We have "Spacesaver" steps (I think they are pretty close to "Biltmore" steps). My question is for the rails; how did everyone mark the rails where they needed to be drilled at the steps seeing as this is under water, will a Sharpie work? Thanks, Calvin.
    15 x 26 Sharkline
    2.5 HP Dual Speed Pump
    200 Sq. Ft. cartridge filter

  2. Back To Top    #2

    Join Date
    Mar 2007
    Location
    Morris, IL
    Posts
    477
    How about lipstick on the rail ends? Saw this on DIY when they used it to mark the location of drains coming through the back of a vanity. I think it would work for you though.
    steve

    Above Ground / 18' Round / Vinyl Liner / Sand Filter / 100K Gas Heater / Salt Added / No Nature2

  3. Back To Top    #3
    Crazycalvin's Avatar
    Join Date
    Mar 2008
    Location
    Irmo, South Carolina
    Posts
    56
    Thanks for the tip. Later, Calvin.
    15 x 26 Sharkline
    2.5 HP Dual Speed Pump
    200 Sq. Ft. cartridge filter

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •