PSI Loss

jasonknox

0
Platinum Supporter
May 4, 2010
301
SW Georgia
In the last week my PSI at the filter has dropped from 13psi to 9psi. I can only think of three things that my be the problem:
1. Gauge is bad
2. Pump is going bad
3. Blockage in pipe between skimmer and pump

Are these the only reasons or have I missed some?

Replacing the gauge is easy and cheap.
How can you tell if it is the pump or not?
 
jasonknox said:
In the last week my PSI at the filter has dropped from 13psi to 9psi. I can only think of three things that my be the problem:
1. Gauge is bad
2. Pump is going bad
3. Blockage in pipe between skimmer and pump

Are these the only reasons or have I missed some?

Replacing the gauge is easy and cheap.
How can you tell if it is the pump or not?

Any air in the basket?
I recently :oops: figured out that my suction side valves were not all the way open and before opening them I had minimal but not zero air in the basket. After opening them and getting rid of the air, my pressure jumped up 2.5 PSI.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.