Dream Maker SPA Manual

[jreedich]

My friend has a Dream Maker SPA GLX-UHS-REC-SD-F. I have searched the net for a maintenance manual that will define the failure codes on the controller. The Controller is built be Balboa Instruments PN 53942-01 Inside the controller they have a RS80 number "system wiring diagram". Anybody have any idea where I can get a manual and schematics for this controller??????

 

[rtkane]

Here's a manual for a UHS series.. not sure if it's the right one. http://dreammakerspas.com/_PDFs/manual_ ... 062111.pdf

The controller in that manual looks a lot like the ML240 from here: http://www.balboawatergroup.com/getdoc.cfm?id=174

Here's a manual for the ML240 (links to a ML200 series, which I believe covers the 240 and also has codes): http://www.poolandspacentre.co.uk/docum ... eGuide.pdf

Maybe this link to Balboa's troubleshooting will help: http://service.balboa-instruments.com/S ... r_mess.htm

 

[jreedich]

Thanks I will check them out. I found a page with error codes on it but the error we are seeing is not there.

 

[rtkane]

Thanks I will check them out. I found a page with error codes on it but the error we are seeing is not there.

What's the error code?

 

[jreedich]

He said it was "5". I told him that makes no sense. When I arrived at his house he had powered down the unit. When I turned it back on The thing started to run and is still running. According to him, when he powered on the unit after an idle time of two weeks, it sounded like it was powering up but then stopped after about 2 seconds and the error code 5 showed up. He then powered down and back up with the same results. When I got there and powered up everything was fine. I think maybe the gremlins were at work.

 

[rtkane]

I wonder if instead of "5" it was actually "S" and he didn't catch other letters with it. There are a ton of "S" codes in that manual:

http://www.poolandspacentre.co.uk/docum ... eGuide.pdf