Summer Escapes pool with intex sand filter

[GillBates216]

I wanted to upgrade our summer escapes pool (15x42) to the intex sand filter (sf15110) but cant figure out the setup.
What would be the best way to modify the the fittings, without having to cut the pool to accept the new parts from intex.

 

[George N]

Welcome to the forum

There is a lot of good info here: http://www.troublefreepool.com/useful-links-for-fellow-intex-pool-owners-t29612.html

And if you Google you can find adapters made to do just that.

 

[carterj92]

You can kind of rig it to work. summer-escapes-pro-series-13-x22-rectangular-questions-t43440.html
Just scroll down a little bit and there are pics of someones setup.

 

[schertzy82]

I think this might be the adapter you need.

http://www.intexcorp.com/index.php/10849.html

You'll also need the 1 1/4 inch hose clamps too, if you don't already have them.

 

[GillBates216]

I think this might be the adapter you need.

http://www.intexcorp.com/index.php/10849.html

You'll also need the 1 1/4 inch hose clamps too, if you don't already have them.

I was hoping Home Depot sold something similar to that.

 

[GillBates216]

You can kind of rig it to work. summer-escapes-pro-series-13-x22-rectangular-questions-t43440.html
Just scroll down a little bit and there are pics of someones setup.

I saw that setup but was alittle stumped because I dont have an in the wall skimmer.

 

[wwhite0310]

I used a 1 1/4' pipe that fit perfect on the pump and used a reducer to go to the 1 1/2 and the went up again to 2'.

 

[wwhite0310]

What skimmer do you have?

 

[GillBates216]

What skimmer do you have?

I dont have a skimmer I'm upgrading to the intex sand filter from anintex model 637r