Pentair Minimax NT won't fire

Jump to latest Follow Reply
G

greggo151

0
Apr 5, 2012
1
My Minimax heater will not start. When I turn it on and adjust the thermostat, I get a "click" at the control panel, and then nothing. The pressure and thermostat lights are on. I checked the blower, and there are no obstructions, and it spins freely. There is no gas smell either. This happens in both pool and spa mode. There are no errors, and the diagnostic LED doesn't blink.

I did use search, and found one thread that seems close to this. They jumpered the blower, but I'm confused what was jumpered.

-Greg
 
Usually, when this happens, it is due to the vacuum switch not "making", aka closing. That is usually the either tube coming undone, has a hole letting air in, or the fan isn't spinning fast enough. The vacuum switch has been proven reliable. Without it making, the gas won't open.

Scott
 
You must log in or register to reply here.
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Top Bottom
Back
Jump to latest Follow Reply