Hi everyone,
We recently moved into a new home that has a saltwater pool with Jandy system (I'm a novice when it comes to pool talk and everything I know I learned on this site - LOVE TFP). We live in Atlanta and do not close the pool for winter. Today we noticed that the waterfall to the pool was running very slow but the flow from the spa was fine. Tonight I tried to prime the pump thinking it had low pressure. Once I did this the waterfall to the pool worked great, but the spa wasn't working at all. I noticed the inlet valve to the spa didn't have any water flowing through it. I turned the pump off and took the inlet valve cover off and put it back on once the water started flowing out. I turned the pump back on and all was great for a few seconds. As the spa started filling up to flow over the edge, the waterfall to the pool slowed down to a trickle. The spa waterfall works great. So it seems only one will work properly at a time. Any ideas?
Thanks in advance!
Nicole
We recently moved into a new home that has a saltwater pool with Jandy system (I'm a novice when it comes to pool talk and everything I know I learned on this site - LOVE TFP). We live in Atlanta and do not close the pool for winter. Today we noticed that the waterfall to the pool was running very slow but the flow from the spa was fine. Tonight I tried to prime the pump thinking it had low pressure. Once I did this the waterfall to the pool worked great, but the spa wasn't working at all. I noticed the inlet valve to the spa didn't have any water flowing through it. I turned the pump off and took the inlet valve cover off and put it back on once the water started flowing out. I turned the pump back on and all was great for a few seconds. As the spa started filling up to flow over the edge, the waterfall to the pool slowed down to a trickle. The spa waterfall works great. So it seems only one will work properly at a time. Any ideas?
Thanks in advance!
Nicole