Help, I have lost the manual for an Intex above ground pool with swg, and with all this heat my swg is reading low salt after adding more and running the pump , i have build up on the cell and do not know how to sevice it, can anyone lead me in the right direction. Please.
Lost the manual
- Thread starter sparsons
- Start date
Clean the cell with a mixture of water and muriatic acid 4:1. That should take the buildup off it.
Thank you. having lost the manual. i am going to assume that the few screws will release the cell after all necessary elec, pumps are off etc. ?
The cleaning procedures vary a little from model to model. If you post a photo or tell us any brand/model name that might be printed on the unit we can give you much more specific advice.
You can download the manual here http://www.intexcorp.com.hk/proifv/proifv_dl_client.jsp?source=intexstore
I have two of the 8110 models from '09. The manual states to use viniger to clean it. I se 4:1 water/pool acid(30%) stuff. cleans in 10 mins. 
Watch your TA mine was 150 and i had to clean my cells every 5 days. There is a water chemistry chart for SWG's here under pool school.
Watch your TA mine was 150 and i had to clean my cells every 5 days. There is a water chemistry chart for SWG's here under pool school.
Similar threads
