Pentair Lights

[woodinsac]

I have two Pentair Intellibrite lights in my pool and a Pentair control panel. The panel was reset a few months ago and is working fine for the pool/vacuum schedules. The lights have never been the same. The come on as scheduled, but are solid blue. They no longer can be changed to different modes or changed from one color to the next. Did I miss a step in my reset? How can I get my lights working again?

 

[AquaDoctorLLC]

Turn the light off, wait 5 secs then turn it back on. They should then cycle. If you want to keep a certain color. Wait or that color and turn the lights off then on quickly.

 

[Guest]

Are the lights configured in the panel as Intellibrite lights? On our Easytouch it's under Settings > Circuit functions > (choose the circuit the lights are on) > Intellibrite

 

[woodinsac]

They are configured as Intellibrite on the Easy Touch Panel. Neither the wireless nor the panel will shut them off with the control Lights>All Off/All On. I have to hard press the AUX button to shut them on or off.

 

[AquaDoctorLLC]

Can you turn them off via the GFI breaker?